Home > Sensors / Devices by Modality > Thought Technology Sensors >
You may also be interested in these:
EMG MyoScan™ Sensor EMG,EMG Myoscan,myoscan,BioGraph,Infiniti,electroencephalograph, physiology,BioGraph,eeg,biofeedback,pIR,HEG,emg,hrv,bvp,semg,temperature,skin conductance,ekg,thoughttechnology,thought technology,thoughttech,thoughtech,thoughttek
EMG MyoScan-Pro™ Sensor    EMG,EMG Myoscan Pro,MyoscanPro,Myoscan,BioGraph,Infiniti,electroencephalograph, physiology,BioGraph,eeg,biofeedback,pIR,HEG,emg,hrv,bvp,semg,temperature,skin conductance,ekg,thoughttechnology,thought technology,thoughttech,thoughtech,thoughttek
Triode self stick snap connection.
Dual InclinoTrac by Thought Technology inclinotrac,incline,biofeedback,gait,sensor,thought technology,inclino trac
ProComp 5 by Thought Technology  ProComp5,Infiniti,ProComp5 Infiniti,thought techhnology,neurofeedback,biofeedback,emg,hrv,bvp,semg,HEG,pIR,
Rehab Suite for MyoTrac series
Unigel Electrode for snap connetion
16" Extender Cables for EMG/EKG electrodes EKG,ekg extender cable,ekg electrode extender cable,emg,emg electrodes, emg electrode extender cable,extender cablehrv,bvp,semg,HEG,pIR,HRV,thoughttechnology,thought technology,thoughttech,thoughtech,thoughttek,eeger,eeger software
DynaMap Suite by Thought Technology Dyna Map Suite,Dyna Map,EMG,BVP,HRV,HRBVP,SEMG,BioGraph,biofeedback,emg,hrv,bvp,semg,thought technology,thought tech
Rehab Suite for Pro and FlexComp series
ProComp Infiniti 8 channel
Bend Sensor by Thought Technology Bend sensor,joint sensor,BioGraph,Infiniti,electroencephalograph, physiology,BioGraph,eeg,biofeedback,pIR,HEG,emg,hrv,bvp,semg,temperature,skin conductance,ekg,thoughttechnology,thought technology,thoughttech,thoughtech,thoughttek

EMG MyoScan-Z™ Sensor

Item #: HWR-9503Z
Availability: Short Stock - limited amount available!
Usually ships In 1- 3 business days
Price: $300.00


    Can be used as an economical substitute for MyoScan 9503M sensor. Impedance function is not available in latest versions of BioGraph software.

    For older versions of BioGraph software...
    Thought Technology is the only manufacturer providing EMG sensors with built-in impedance check.

    Benefits of impedance check:

    • Good contact between the electrodes and the skin is required to have a good quality signal and prevent artifacts.
    • Measuring the impedance between the electrodes is the recommended way to verify good contact. It is simple, fast and accurate.
    • It shows instantaneously which electrode is not properly connected or which part of the skin is not well prepared.

    MyoScan-Z is a pre-amplified electromyography sensor with built in impedance sensing. Get the ultimate hook up every time with this sensor as it monitors skin impedance and sensor connection. Signal Input Range 0 -2000 µV, Bandwidth 20 Hz – 500Hz. Used with the ProComp/Procomp5 Infiniti channels A – B or all FlexComp-Infiniti channels.

    The new MyoScan-Z EMG sensor joins our line-up of physiological sensors. Designed for a sampling rate 2048 samples per second, this new EMG sensor offers a unique impedance check mode, which can be triggered from BioGraph Infiniti software version 5.0. It measures raw EMG signals with a range from 0 up to 2000 micro-Volts.

    MyoScan-Z makes impedance check fast, easy and reliable, and avoid risk of cable misplacement.
    Get the ultimate hook up every time with this sensor as it monitors skin impedance and sensor connection.

    Impedance check is usually performed with an impedance meter. When you use a regular impedance meter, you have to:

    • interrupt the session
    • disconnect the cables
    • connect the meter to each site and measure them one by one
    • reconnect the cables (at the right place)
    • restart the session
    • And this, every time you need to verify the impedance!

    With MyoScan-Z, you can get it done in 3 clicks:

    • pause the session

    • run the impedance check simultaneously on all the sites without disconnecting any cable

    • unpause the session

    Also see real-time results in a glance with the color coding:

    BioGraph Infiniti – Impedance Check Screen

      Recommended for

      Acceptable for Biofeedback training

    but not recommended for assessment




    Technical Specifications:
    Size 37mm x

    37mm x 12mm (1.45” x 1.45” x 0.45”)
    Weight 15g (0.5

    Input Impedance 1012ohms in parallel

    with 10pF
    Input Range 0 –

    Sensitivity <0.1µVRMS
    CMRR >130dB
    Channel Bandwidth 10Hz –

    Signal Input Range 0 – 2000

    Input / Output Gain 500
    Supply Voltage 7.26V (±

    Current Consumption 0.7mA (±

    Accuracy 0.3µVRMS Plus 4%

    of reading @25°C to 30°C,

    (For use with the
    ProComp/Procomp5 Infiniti channels A – B or all FlexComp-Infiniti channels. Requires BioGraph Infiniti 5.0 or later)
    • EEG Sales LLC
    • 800-400-0334
    • info@eegsales.com

    Shop EEG Sales

    EEG Sales LLC offers a full and comprehensive list of quality products and supplies at competitively discounted prices for practitioners of Neurofeedback and Biofeedback. EEG Sales is an authorized distributor for Thought Technology and an authorized reseller for BrainMaster Technologies. We are proud to offer IMA Electronics hand-crafted electrodes and many of the finest equipment and supply brands available. Customer service and quality of product are top priorities with EEG Sales.

    PayPal Acceptance Mark